Red
MAX
™
Base Station
user manual
Doc. #70-00058-01-01-DRAFT
Proprietary Redline Communications © 2006
November
29,
2006
Page 39 of 106
SF Info
Click the MAC address of any subscriber listed in the
SS Info
screen to view service
flow settings and statistics.
Figure 18: Web - Monitoring - SS Info - SF Info Screen
SFID
: Service flow identifier for this service flow.
Direction
: Direction of service flow:
Downstream
: Downlink traffic from base station to subscriber.
Upstream
: Uplink traffic from subscriber to base station.
State
: Current status of the service flow.
Active
: Service flow is currently active.
Authorized
: Service flow configuration has been saved but is not active.
Edited
:
Service flow configuration is being edited and is not saved.
Provisioned
: Subscriber has been deregistered.
Rejected
: base station was not able to setup the service flow.
Requesting
: base station is attempting to setup the service flow.
Provisioned Time
: Time elapsed since this service flow became active.
CS Specification
: Classification type associated with this service flow.
802.3 Ethernet
: The classifiers for this service flow are based on the combination of
the fields in the Ethernet packet's header.
IPv4
: The classifiers for this service flow are based on the combination of the fields
in the packet's IP header.
802.1Q
: The classifiers for this service flow are based on the combination of the
fields in the Ethernet packet's header and 802.1Q VLAN tag.
Enable/Disable
: Indicate the operator selected status for this service flow:
Enabled
: Service flow is manually enabled by the operator.
Disabled
: Service flow is manually disabled by the operator.
Throughput Kbits/sec
: Traffic throughput rate for this service flow.
Total Packets
: Total packets exchanged with the subscriber (all service flows).
Refresh
: Update the screen with the latest totals.