Red
MAX
™
Base Station
user manual
Doc. #70-00058-01-01-DRAFT
Proprietary Redline Communications © 2006
November
29,
2006
Page 33 of 106
4.1.1 Configuration Using a Web Browser
1. Set the IP address of your PC to the following settings:
IP Address: 192.168.101.110
Subnet mask: 255.255.255.0
2. Connect the host (laptop) computer directly to the Data port of the base station
terminal using an RJ-45 Ethernet (straight-through) cable.
3. Power-on the base station terminal and restore the factory default settings by
depressing the reset switch on the front panel for more than five (5) seconds.
4. Launch a Web Browser on the PC and enter the terminal IP address in the browser
address field (192.168.101.3). The General Information screen is displayed and the
operator can now login to the terminal.
Figure 12: Web - Access - Browser Address Field
Click on any configuration menu item to activate the login dialog screen.
Figure 13: Web - Access - base station Login Screen
Enter the default user name and password:
User Name
: admin
Password
: admin