4
ACCESSORIES INCLUDED
1. Accessory Storage Case [ 91-0006 ]
2. PowerSmoke
™
Adaptor 3.9 in. (10 cm) Diameter [ 95-0083 ]
Inflatable block off bladder with a pressurized vapor
pass-through. Kit includes 2.
(Optional)
PowerSmoke
™
Adaptor 2.9 in. (7.4 cm) Diameter [ 95-0081 ]
Inflatable block off bladder with a pressurized vapor pass-through
3. Block Off Coupler [ 96-0084 ]
Used to block smoke hose to convert PowerSmoke
™
Adaptor into
a block off bladder
4. Exhaust Stack Retention Hoop [ 15-0064 ]
Prevents adaptor from falling into exhaust stack
5. SmokeMeister
™
Wand [96-0088 ]
20 in. (51 cm) - 60 in. (152.4 cm) tube delivers vapor to find wind and
water leaks in cabin or trunk.
6. Wand / Tip Adaptor [ 15-0080 ]
Install into SmokeMeister
™
wand for pinpoint vapor stream
7. Halogen Inspection Light [ 96-0011 ]
12V DC with 20 ft. (6.1 m) cable. Always use to pinpoint leaks
8. AC Power Cable [ 20-0010 ]
Use with AC Power. Cable must be rated to match input voltage and
plug configuration
9. OEM-Approved Smoke Producing Fluid [ 96-0039 ] 8 fl. oz. (237 ml)
Vapor Producing Fluid will perform over 500+ typical tests per bottle
Important: Contains NO Dye / Contaminants. Kit includes 3.
10.
Hex Key [ 80-0009 ]
To remove / replace fluid fill plug
11. Cooling System Adaptor [ 96-0086 ]
To test cooling system or coolant reservoir. Attach to radiator
12. Oxygen Sensor Port Adaptor [ 15-0059 ]
Use to access exhaust system through oxygen sensor port
13. Temperature Sensor Port Adaptor [ 15-0056 ]
Use to access intake or exhaust system through temp sensor port
14. Pressure Sensor Port Adaptor [ 15-0055 ]
Use to access intake or exhaust system through pressure sensor port
1
2
3
4
5
6
7
8
9
11
14
1
13
12
10