background image

1

SPECIFICATIONS

Dimensions

9 in. x 9 in. x 15 in. (23 cm x 23 cm x 38 cm)

Weight  - HD PowerSmoke

 

19 lbs. (8.5 kg)

Weight - Accessory Kit Only

16 lbs. (7.3 kg)                                                                                                         

Shipping - Weight   

41 lbs. (19 kg)

Shipping - Dimensions

20 in. x 15 in. x 24 in. (50 cm x 38 cm x 60 cm)

Power Supply    

110-240V AC or 12V DC

Pressure Supply

Compressed Air

Output Pressure

2 to 20+ PSI (0.14 to 1.4+ BAR)

Operating Temperature

0°F to 140°F (-17°C to 60°C)

Operating Humidity

No Restrictions

Operating Altitude

No Restrictions

Vapor Output Hose

15 ft. (5 m)

12V Power Cable

15 ft. (5 m)

Operating Modes

Vapor Cycle / Air Only Cycle

Housing Material

Steel

Vapor Chambers Material

Billet Aluminum

Vapor Chambers Assembly

Bolted

Vapor Chambers Warranty

Lifetime

HD PowerSmoke

  Warranty

1 Year

The manufacturer, Redline Detection, LLC (“Redline”) warrants this product to be free from defects in workmanship and material 

under normal use and service for a period of one-year from the date of purchase. Redline’s liability under this warranty is limited 

to: (1) repair or replacement of any parts or product which are determined to be defective; or at Redline’s sole option (2) refund 

of the purchase price. In either event, product to be returned shipping prepaid within the one year warranty period. Additionally, 

the vapor chamber in any Redline product has a lifetime warranty as to its structural integrity: Any Redline-manufactured vapor 

chamber that leaks, cracks, or separates in any way shall be repaired or replaced by Redline at no charge. Products are only to 

be used by persons having skill and knowledge in the motor vehicle repair field, and improper use or maintenance may cause 

serious injury. In no event shall Redline be liable beyond replacement of product or refund of the purchase price.  This warranty 

shall void if a product is improperly maintained, altered, abused or otherwise misused in any way.

THE AFORESAID WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, AND THERE ARE NO OTHER WARRANTIES OR 

REPRESENTATIONS OF ANY KIND WHATSOEVER MADE BY REDLINE, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT 

LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR APPLICATION.

THE PURCHASER’S SOLE REMEDY FOR ANY DEFECTIVE PRODUCT SHALL BE REPAIR, REPLACEMENT OR REFUND AS STATED 

ABOVE AND REDLINE SHALL NOT BE LIABLE TO ANYONE FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, INDIRECT OR 

PUNITIVE DAMAGES ON ACCOUNT OF DEFECTIVE PRODUCTS, HOWEVER CAUSED, UNDER ANY THEORY OF LABILITY.

WARRANTY

Summary of Contents for 95-0171













Reviews: