AN-80i
Installation Guidelines
70-00073-01-08-b
Proprietary Redline Communications © 2011
Page
17
of 58
May 27, 2011
2.4
Overview
The components in the following illustration are supplied with each AN80i system.
Figure 5: Installation - Redline Supplied Components
Table 4: System Components Available from Redline
#
Description
1
AN-80i radio.
2,3,4,5 Mounting kit for AN-80i. All kits include RF jumper cable.
Lightweight mount includes mounting bracket with assembly hardware. Adjusts for
44.5 to 76.2 mm (1.75 to 3.00 in)
mast. Includes 228 mm (9 in) RF cable.
Heavy-duty mount includes mounting bracket with assembly hardware. Fits 44.5 to
117.3 cm (1.75 to 4.62 in) mast. Includes 400 mm (16 in) RF cable.
Stand-alone mount includes adapter bracket with assembly hardware and clamps.
Fits 70 to 120 mm (2.75 to 4.75 in) mast. Includes 400 mm (16 in) RF cable.
6
Sector antennas (flat panel).
7
Subscriber antennas (flat panel and parabolic).
8
Line protection (LP) unit for Ethernet cable (install where cable enters building).
9
Cat-5e shielded outdoor Ethernet cable terminated with RJ-45 connector each end.
10
PoE power injector with single AC 110/220 VAC input, single 10/100 Ethernet data
port, plus single 10/100 powered Ethernet port.
11
Power cord for AC type PoE power injector only. The AC power cord must be
ordered separately from the PoE.
12
AN-80i Quick Start Guide
