background image

RDL-3000 

FAMILY

 

RDL-3000-RMH  PRODUCT  MANUAL

 

70-00248-00-00 

Proprietary Redline Communications © 2019

 

Page 

6

 of 10 

February 5, 2019 

 

Module Installation and Service 

3.1  Installation Into a Final Product 

The  RDL-3000-RMH  must  only  be  installed  by  trained  professional  technicians 
authorized by Redline or its agents. The module must be installed only into an approved 
enclosure  (see  Conditions  of  Use)  and  only  at  an  approved  manufacturing  facility  or 
service depot. 

3.2  Module Servicing 

The  RDL-3000-RMH  is  not  intended  to  be  field  serviceable,  and  contains  no  field 
serviceable or field replaceable parts. The module must be serviced only at an approved 
manufacturing facility or service depot. 

 

Warning: 

The  RDL-3000-RMH    are  susceptible  to  damage  from  electrostatic 

charge.  Electrostatic  Discharge  (ESD)  must  be  avoided  to  prevent  damaging  or 
destroying the module. The module must always be store in an anti-static container/bag 
prior  to  installation  and  following  removal  from  the  product  for  servicing.  Observe  ESD 
precautions when handling the module. 

3.3  Professional Installation 

Devices  containing  the  Redline  RDL-3000-RMH  require  professional  installation.  It  is 
the  responsibility  of  the  installer  to  understand  the  product  operation  by  attending 
training  as  required,  reading  and  understanding  the  product  documentation,  and 
ensuring  that  all  building,  safety  and  regulatory  codes  are  met  and  the  installation  is 
complete and secure. 

3.4  Safety Precautions  

Installation  and  service  must  be  done  by  personnel  having  technical  training  and 
experience  necessary  to  be  aware  of  hazards  during  installation  and/or  service  of  RF 
equipment. The installation and/or service must be done using procedures designed to 
minimize any danger to technical personnel or any other person.  

3.5  Radio Frequency Safety 

The installer of this radio equipment must ensure the antenna is located or pointed such 
that it does not emit RF fields in excess of the general population limits as defined by: 

  FCC CFR 47, Part 2.1091 

http://www.gpo.gov/fdsys/pkg/CFR-2009-title47-vol1/pdf/CFR-2009-title47-vol1-sec2-
1091.pdf

 

  FCC 

OET  Bulletin  65, 

Radio  frequency  radiation  exposure  evaluation  for  fixed 

devices 

http://transition.fcc.gov/Bureaus/Engineering_Technology/Documents/bulletins/oet65
/oet65c.pdf

 

Refer to the regulatory statements included in this document. 

Summary of Contents for RDL-3000 Family











Reviews: