Redline Communications AN80IE User Manual Download

Page: 61 / 106

User

AN-80i

Manual

70-00072-01-07

Page 61 of 106

Sept 18, 2008

Blocks

Blocks Total

: Total number of blocks retransmitted over the wireless interface.

Blocks Retransmitted

: Number of blocks retransmitted over the wireless interface.

Blocks Discarded

: Number of blocks discarded (could not be sent over the wireless).

Controls

Refresh

: Click

Refresh

to update the statistics display.

Reset Statistics

: Click this button to zero the counters for the wireless and Ethernet LAN

Statistics displayed on this page.

4.6.2

Group

Statistics

Use the

Group

statistics screen to view statistics for all downlink traffic on

Connections

this

Group

. Click

Groups

in the menu to display the

Groups

browse screen. Click

Status

display downlink statistics for the selected

Group

Figure 33: PMP - Group Statistics Screen

General

Group Name

: Name assigned to this

Group

Group ID

: Unique numeric identifier for this

Group

Packet (Downlink)

Packets Discarded

: Number of Ethernet packets discarded (could not be sent over the

wireless interface).

Packets Transmitted

: Number of Ethernet packets transmitted over the wireless interface.

Packets Received

: Number of Ethernet packets received over the wireless interface.

Controls

Reset

: Click

Reset

to zero the statistics values.

Refresh

: Click

Refresh

to update the statistics display.

Summary of Contents for AN80IE











































































































Search results

Summary of Contents for AN80IE

Reviews:

Related manuals for AN80IE

Brands by name

Popular brands

Redline Communications AN80IE, User Manual

Search results

Summary of Contents for AN80IE

Reviews:

Related manuals for AN80IE

Brands by name

Popular brands