Redline Communications AN80IE User Manual Download Page 57

Page: 57 / 106

User

AN-80i

Manual

70-00072-01-07

Page 57 of 106

Sept 18, 2008

4.5

Browse Screens

4.5.1

Links Screen

Click

Links

in the menu to display the links browse screen. This is a list of all configured

wireless links.

Figure 29: PMP - Links Browse Screen

: Unique number identifying each link.

Name

: User-assigned name for each link.

Config

: Click

Config

on any line to display the

Link

Configuration

screen associated with

that

Link

Status

: Click

Status

on any line to display the

Link

Statistics

screen associated with that

Link

. This includes uplink and downlink statistics for the link.

Expand

: Click

Expand

on any line to display the

Connections

browse screen showing all

Connections

associated with that

Link

Delete

: Click

Delete

on any line to delete that

Link

. A link can not be deleted until all

Connections

referencing this link are deleted.

Summary of Contents for AN80IE











































































































Search results

Summary of Contents for AN80IE

Reviews:

Related manuals for AN80IE

Brands by name

Popular brands

Redline Communications AN80IE, User Manual

Search results

Summary of Contents for AN80IE

Reviews:

Related manuals for AN80IE

Brands by name

Popular brands