&
User
AN-80i
Manual
70-00072-01-07
Proprietary Redline Communications © 2010
Page 45 of 106
Sept 18, 2008
3.10.2
Change SNMP Trap Configuration
Each of the eight entries in the SNMP Traps Management table may be changed
individually. Click the Chg button to modify the settings for the adjacent entry.
Figure 19: Web - SNMP Trap Configuration Screen
Index
: Display the table position number for this entry. Position 0 is the first entry.
IP Address
: Enter the IP address (IPv4) associated with this SNMP alarm.
Port
: Enter the destination port address associated with this SNMP alarm.
Community Name
: Enter the SNMP community name for this entry.
Change Trap
: Click the Change Trap button to copy these settings to the community
settings table. This action does not permanently save changes. To save changes to the
SNMP trap settings you must click the Save Traps button in the SNMP Configuration
screen.
