AN-50e
user manual
70-00033-01-03
Proprietary Redline Communications © 2005
September
2005
Page 47 of 100
3.6 System
Password
Screen
Click
System Password
in the left hand menu to display the System Password
screen. This screen allows the operator to modify the system passwords.
Figure 15
:
Web - System Password Screen
The factory default password for the system is 'admin' for the username 'admin'
and 'user' for the username 'user'. To change the password, enter the username and
the old password. Enter a new password in the two lower fields using any
alphanumeric combination. Note the field is case sensitive and can be up to sixteen
characters in length.
Confirm New Password
: Re-enter new password (avoids typing errors).
New Password
: Enter new password.
Old Password
: Enter current password.
Username
: Enter user name.
Note: The original factory default passwords can be restored by depressing the
front panel Reset button for more that five seconds. This also resets the
configuration to the factory default settings. The software version is not effected.
