
REDLAKE MASD, INC.
3.13 Save
TYPE IN:
RESPONSE
EXPLANATION
SAV
CR-LF
Saves the current camera settings to EEPROM; these
settings will be recalled by a RESET or by turning the
camera power on.
NOTE
: The EEPROM used by the SAVE command has a finite life of roughly 10,000 erase and
program cycles. We recommend that the SAVE command be used occasionally to store
your most generally applicable setup and not as a daily routine.
3.14 Status Query
The Status Query command enables the user to get all of the camera operating parameter
information with a single command.
TYPE IN:
RESPONSE
EXPLANATION
STS?
DEF xx
GAE xxx
BKE xxxx
MDE xx
SHE xx
EXE xx
TRM x
TRE x
STP x
Gives complete camera status with one query. The
following parameters are transmitted with a carriage
return after each parameter:
Shows Defect Concealment status.
Shows Gain setting.
Shows Black Level setting.
Shows the operating Mode.
Shows the Shutter status
Shows the Exposure time.
Shows the Trigger logic polarity.
Shows the Exposure state.
Shows the polarity of the Strobe Pulse.
A typical reply to STS? would be as follows:
DEF ON
GAE
6
BKE
610
MDE
CD
SHE
ON
EXE
100
TRM P
TRE 1
STP
N
3.15 Identification Query
TYPE IN:
RESPONSE
EXPLANATION
IDN?
Mega
Plus Model
1.4i, Vx.xx
Queries the camera model number and software
version.
91000050-002 Revision A
3-8
10/01/01
Summary of Contents for 1.4i
Page 6: ...REDLAKE MASD INC THIS PAGE INTENTIONALLY LEFT BLANK 91000050 002 Revision A vi 10 01 01 ...
Page 10: ...REDLAKE MASD INC THIS PAGE INTENTIONALLY LEFT BLANK 91000050 002 Revision A 1 4 10 01 01 ...
Page 16: ...REDLAKE MASD INC THIS PAGE INTENTIONALLY LEFT BLANK 91000050 002 Revision A 2 6 10 01 01 ...