Thank you for your purchase of EASY LIFT.
What’s Included:
Easy Lift Shade with Trimming Scale | Trimming Guide
Measure your window width in 3 locations. Use the
smallest measurement.
(Please note our patented cutting scale already takes
into account the clearance deduction for inside mount.)
1
2
Measure
Trim
3
Install & Operate
a)
Peel to remove liner.
©2015 Redi Shade, Inc. www.redishade.com
021715
b)
Press firmly across width of
shade to install.
c)
Pull shade down to lower
and push up to raise.
View the Easy Lift trimming and installation video at www.redishade/easy-lift.com.
Customer Service: 1-888-608-6611
A smooth kitchen knife with a 3.5” inch blade is recommended.
1)
Remove bottom rail end caps.
2)
Place cutting guide at exact desired width.
(No clearance deduction needed; it’s already included).
3)
Position the knife blade at an angle on the top of the shade at your exact measurement.
a)
Press firmly cutting through rails and fabric with a rocking motion and constant pressure.
b)
Trim each side of the shade to the same exact window measurement.
4)
Replace end caps on bottom rail.
1
2
3
4
