17
12.1 ADJUSTABLE GUARD PLATE ADJUSTMENT
Fig. 11
The machine is equipped with an adjustable guard plate. The plate is mounted above the brush.
This can adjust the material flow of the brush. The adjusting the guard plate goes as follows (see
fig. 11):
!! Make sure the tractor is secured in place and cannot start moving!!
!! Switch the tractor off prior to getting off!!
1. Push button (2) and turn simultaneously lever (1) counter clockwise to loosen the cover.
2. Do this for both sides.
3. Adjust the cover to the desired position. Do this for both sides so that the guard plate is set
level.
4. Push button (2) and turn simultaneously handle (1) clockwise to fasten the cover.
