11
Fig. 8
5.0 WORKING DEPTH ADJUSTMENT OF BRUSH
The working depth of the brush can be adjusted through changing the wheels at the front of the
machine.
The procedure is as follows:
(see fig.8)
!! Make sure the Speed-Clean is blocked properly and cannot move on its own !!
!! Turn off the tractor before dismounting !!
1. Turn Knob (1) clockwise to raise the brush
2. Turn Knob (1) counter clockwise to lower the brush
3. Follow point 1 or 2 for the other side of the machine so that the machine is
adjusted parallel.
NEVER
set the machine in such a way that damage can occur to the surface to be worked.
! IMPORTANT !
First statically check the working depth of the surface to be worked before using the
machine!
Experience has shown that the best machine setting for top-layer cleaning is when the
hairs of the brush do not touch the fibres of the grass.
