22
12. OPTIONS
12.1
Weight kit
Standard, the Overseeder 3D is equipped with a front bar to which the weights (
1
) can be attached
(see
Figure 9
).
Depending on your requirements, a certain number of weights (@ 25 kg/item [55 lbs/item]) can be
attached. The maximum number of weights that can be attached to each type of machine is listed at
the bottom of this page.
Figure 9
Do the following to mount the weights:
1. Remove the locking pin (2).
2. Slide the required number of weights (1) onto the axle.
3. Return the locking pin (2) into the frame.
General remarks about the weight kit:
!!
Always secure the attached weights using the locking pin (2) !!
!!
Never crawl under the machine !!
!!
Make sure that the machine and the tractor cannot move while you are detaching
them !!
!! Switch off the tractor engine before detaching the machine !!
The following weights per machine are available:
•
Overseeder 3D 1275:
max. 12x
492.502.800 (300 kg / 661 lbs)
•
Overseeder 3D 1575/1575LV:
max. 18x
492.502.800 (450 kg / 992 lbs)
•
Overseeder 3D 2075:
max. 26x
492.502.800 (650 kg / 1433 lbs)
1
2
Summary of Contents for OVERSEEDER 3D 1275
Page 14: ...14 Figure 6 1 2 3 4...