COVER HS Series – User manual
COMEX S.A.
3
2.
Installation procedure
This chapter is dedicated to the installation method, how to mount and wiring the UPS.
2.1.
Introduction
This chapter describes the basic requirements for the positioning and wiring of the power
supply. This description is a step-by-step installation guide, which provides a number of
guidelines for how to guide your service during assembly.
Warning - Installation may only be carried out by an authorized service center
1. Do not connect electrical appliances to the power supply before confirming that the power
supply is properly connected and configured.
2. The UPS should be installed by qualified technicians in accordance with the guidelines in
this chapter.
Do not perform any electrical work that interferes with the electrical installation before and
after the UPS while the UPS is operating. Damage arising from this title (eg phase sequence
replacement) is not covered by the warranty.
Warning: dangerous batteries
Special precautions must be observed when working with batteries connected to the power
supply. After connecting the battery, the voltage at the terminals exceeds 400 Vdc and is
potentially fatal.
It is recommended to use protective eyewear to protect your eyes from accidental electric
arc. In addition, it is recommended that:
Remove the rings, watches and all metal objects.
Use only tools with insulated handles.
If the battery leaks or the battery other way is damaged, replace it. Damaged batteries
should be stored in a container resistant to sulfuric acid and disposed of in accordance
with local regulations.
If the electrolyte comes in the contact with the skin, the contaminated area should be
washed immediately with water.
2.2.
Preliminary review
Please perform the following checks before installation:
Check visually whether the equipment supplied, ie the UPS and the batteries, have not
been damaged as a result of their transport. Any damage should be reported immediately
to the supplier.
Verify the compliance of the supplied equipment with the installation requirements. The
power of the power supply is described on the label each time.
警告
危 险
警告
危 险
