COVER HS Series – User manual
COMEX S.A.
36
5
LCD panel support
The following section describes the functions and capabilities of the control panel in the power
supply, including key functions and available information from the LCD touch screen.
5.1 Introduction
The power supply panel with LCD display is located on the front panel of the UPS. The LCD
display gives the user full access to work status monitoring, switching between operating modes
as well as control of work parameters and event logging. The power supply control panel is
divided into three sections, as shown in the figure below. There is a LED display of energy flow
and status of each power supply module, LCD display, and keypad with EPO switch. The symbol
details shown on the LCD panel are explained in the table below.
1
2
3
4
6
7
8
9
5
BYP
INV
MUTE
10
11
12
1: LCD touch screen
2: EPO
3: Volume
4: State diode
5: Bypass diode
6: Rec diode
7: Inv diode
8: Load diode
9: Battery diode
10: Transfer to bypass
11: Transfer to inverter
12: Mute
Figure 5-1 View of the power supply control panel.
