5. Shock sensor bypass
Press
button within 3 seconds, press to
select bypass or operate the shock sensor
detection.
The siren chirp twice to indicate that the shock
sensor is bypass, the siren chirp once to
indidate that the shock sensor is operating.
Note:
•
Default setting is operating.
•
1. Alarm arming & lock the doors (Active arming)
Press button once on transmitter, the doors
will be locked with chirp and turn signals flash
once. The LED light flashes to indicate that
system is armed in alarm arming mode.
2. Mute arming & lock the doors (Active arming)
Press button once on transmitter, the doors
will be locked with turn signals flash once and
siren will not chirp. The LED light flashes to
indicate that system is armed in mute arming
mode.
3. Disarming & unlock the doors
In alarm arming mode, press button once, the
doors will be unlocked. The siren will "Bi" twice
with turn signals flash twice, then the system
will be disarmed.
In mute arming mode, press button once, the
doors will be unlocked. The siren will not chirp
with turn signals flash twice, then the system
will be disarmed.
4. Shock sensor triggering
In alarm arming mode, when the first impact to
vehicle triggered the system, the siren will chirp
for 5 times with turn signals flashing.
If the system is triggered again within 15
seconds, the siren will chirp sharply and turn
signals will flash for 30 seconds, the engine will
be immobilzed.In mute arming mode, the shock
sensor will trigger the system.
This system is for vehicles with 12V DC only.
System should be installed by a professional
auto technician.
The installation position of ECU should be
kept away from water and dust.
All components should be fixed tightly and
the wires must be long enough to avoid
disconnection from heavy vibration during
driving.
This system will help to reduce the possibility
of losing the vehicle by discouraging theft.
Please take out the valuables when leaving
the vehicle.
When the transmitter operating distance is
shorter or its indicator light turns dark, please
recharge the transmitter battery ASAP.
It is highly recommended to read this manual
before using this system.
Perform a functional test after installation.
The operation distance may affected by
constructions, topography or weather.
Please do not open or change the PCB
without authorization.
Remote trunk release
Compatible with central locking system
Valet mode
Emergency override
Anti-hijacking
Max. 4 transmitters can be programmed in
one
unit
Disclaimer
Key features
Specifications
System:
Operating frequency: 315.5MHz
Operating voltage: 12~3V
Static current: <20mA
Siren SPL: 85~125dB
Transmitter:
Operating frequency: 315.5MHz
Operating voltage: 9V
Static current: <1uA
3) In mute arming mode, the LED indicator will
flash continuously to indicate that the vehicle
has been triggered.
18. Status preserving
The system will return to the former status in 5
seconds when the power is on again, even the
power is cut off.
19. Valet mode
In disarming mode, turn ACC in ON position,
then hold
button for 3 seconds LED indicator
will turns on, then press
button within 5
seconds, the siren will "Bi" once with LED
indicator turn on and enter valet mode
successfully.
In valet mode, turn ACC in ON position, press
button once, LED indicator turn off and the siren
"Bi" twice to exit the valet mode.
20. Emergency override
If the transmitter lost or failed to operate, the
system can be disarmed by the emergency
override.
In arming mode, Open the door(Keep Open),
Turn ACC ON, and foot on brake, and then
release, and repeat it 5 times and keep foot on
brake on last time, then the system will disarmed.
21. Transmitter programming
Method 1:
11. Door closing reminder
When arming the system, if the door not closed
properly in 5 seconds, the siren will “Bi” 3 times
with turning light flashing. The door should be
closed properly and then arming the system
again, otherwise, after 35 seconds the siren
will chirp sharply for 4 minutes 30 seconds.
12. Re-arming automatically
Press
button once, the system will be
disarmed with the doors unlocked. If the door is
not opened in 25 seconds, the system will
re-arm automatically.
13. Dome light delay
The function is specially designed for the
vehicle with dome light function. The system
will enter the arming mode automatically once
the dome light turned OFF.
14. Arm reminder/Passive arming
When the engine OFF and system not arm in 5
seconds, the turn signal will flash 3 times and
siren will trip 3 times to remind the user arming
the system, the sound can be ON/OFF by
Jumper 3(Default is ON);
The system will enter to mute arming mode
after 1 minute, but the doors will not locked, the
passive arming function can be ON/OFF by:
Open door, press search button 5 s, siren will
beep 3 times, then press mute button, siren
sound 1 time, mean auto arming ON, siren
sound 2 times, means auto arming OFF, 10s
after mute button pressed, system will exit.
15. Central door automation
The door will be locked by pressing the
footbrake after the engine is running 15
seconds. The door will be unlocked
automatically after engine off.
This function can be enable/ disabled by J2 on
the MCU. (Please refer the Jumper selection)
16. Warning for roadside stop
When stopping by roadside with the door
opened, the turn signal will flash 30 seconds to
warn the approaching vehicles.
17. Warning for triggered system
If the system has been triggered in arming
status, the siren will alarm when the system is
disarmed and the door is opened:
1) The siren will chirp twice when shock sensor
is triggered.
2) The siren will chirp 4 times when door/ trunk/
hood is opened, or ACC is ON, or footbrake
is pressed.
Note:
Hold the learning button during transmitter
programming mode.
Only 4 transmitters can function with the same
system.
When the third transmitter is programmed, the
LED indicator will flash 3 times then turns on;
the fourth transmitter is programmed, on the
LED indicator will flash 4 times then turns.
1 )
2 )
3 )
Hold the learning button in the ECU, the
LED indicator will turn on the system and
enter the first transmitter learning mode.
Press any button on the transmitter once,
the LED indicator will flash once then light
on to indicate the first transmitter is
programmed successfully.
Press any button on second transmitter
within 16 seconds, the LED indicator will
flash twice then turns on to indicate the
second transmitter is programmed
successfully.
Brief look of transmitter
Functions
6. Ignition on, opening door/ trunk, foorbrake
trigger
In alarm arming mode or mute arming mode, if
the system is triggered by ignition on, doors
opened, trunk released or footbrake pressed,
the siren will chirp for 30 seconds with the turn
signals flashing continuously, the engine will be
immobilized. The system will return to its former
arming status after alarm.
Note:
If the system has been triggering by the ignition
on/ opening door&trunk/ footbrake, the system
will chirp not exceed 4minutes 30 seconds. (The
system will detect every 30 seconds )
* The graphic only for reference
7. Alarm pause
In armed status, door/ trunk/ hood opened and
ignition on, shock sensor will trigger the system
and alarm chirping continuously, press
button
or
button to stop the alarm and system will
return to its former arming status.
8. Remote trunk release
Hold
button or
button for 2 seconds to
release the trunk.When remote trunk release,
the system will disarm the system first.
9. Locating/ panic
Press
button once or press
button for 2
seconds, the siren will chirp for 15 seconds with
turn signals flashing for 15 seconds to locate
the car. (Yet, the siren will not chirp in mute
warning mode.)
When ignition is on, hold
button for 2 seconds,
the siren will chirp for 30 seconds with turn
signals flashing to deter others when you're
driving. Press any button to exit this mode.
10. Anti-hijack
When ignition is on, hold
button for 2 seconds
to trigger this function, turn signals will flash
once. After 10 second, the siren will chirp
sharply with turn signals will flash quickly until
is pressed.
If following the steps to bypass the shock
sensor,you can disarm the vehicle and then
open the door/ turn ACC on or press
footbrake to operate the shock sensor
detection once arm again.
Disarm button
Arm button
Mute button
Panic button
Trunk release
button
898G
Manual
Professional Security
www.steelmate.net
