Pub. 42004-545A
telephone VoIP WiFi Telephone Manual
Page 17 of 29
P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-545A.docx
03/20
Table 4. Auxiliary Inputs—P12
Pin
Label
Function
1
IN4
Input 4
2
GND
Common
3
IN3
Input 3
4
GND
Common
5
IN2
Input 2
6
GND
Common
7
IN1
Input 1
8
GND
Common
Outputs
The telephones have two dry-contact outputs for customer use. Terminate these outputs to connector
P10
, on the VoIP Carrier PCBA (see Figure 17).
Table 5. Output Contacts—P10
Pin
Label
Description
1
OUT1
Common Output 1
2
Normally Open Output 1
3
OUT2
Common Output 2
4
Normally Open Output 2
Programming
The network configuration must provide VoIP service (using the SIP protocol) between the desired
locations before attempting to configure a GAI-Tronics VoIP telephone.
First Time WiFi Interface Setup
Setup the WiFi interface to configure the telephone’s WLAN connection security:
1.
Power on the telephone by connecting 24 to 48 V dc to terminal block
P5
.
The factory default configuration of the VoIP WiFi telephone’s interface is an access point on a
network named (SSID)
HF-A11x_AP
.
2.
connect to the HF-A11x_AP network using a PC/laptop with a wireless adapter.
The yellow LED on the telephone’s WiFi interface should be ON when the PC is connected to the
HFA11_AP network
3.
Open a web browser on the PC and enter
10.10.100.254
into the address field and press
E
NTER
.
The HF-A11x_AP WiFi log in window opens.
