By default the Denecke is set to match normal frame settings (24fps) but this can be adjusted using a small
flat head screwdriver with the black indicator dial inside the battery compartment.
Denecke Troubleshooting
Q: Strobe stays quick after attaching Denecke to Sound Devices 788t.
A:
Be sure to set SB-3 to the same frame rate as the 788t.
Field Monitor
The Manhattan field monitor is a high quality third party monitoring option. It may be connected to the
Red camera via HDMI, or preferably 3G SDI. It runs on Sony NP style batteries. These are the same
batteries which run the Sound Devices recorders, as well as the small LED light panels.
The Manhattan field monitor has a wide variety of user options, including 1:1 pixel mapping, build in
focusing and exposure controls, and a hard plastic sunshade for outdoor use.
Field Monitor Troubleshooting
Q: Monitor is flickering and resetting.
A:
Probably a power supply issue. Use fresh SONY BRAND battery
Q: There are no menus on monitor/I want to get rid of the menus.
A:
Be sure SDI output is set to “show menus” if you want to see them, or to “clean” if you do not
want to see them.
