COPYRIGHT © 2015 RED.COM, INC
RED ROCKET-X INSTALLATION INSTRUCTIONS
955-0033, REV-E
|
40
1. Open REDCINE-X PRO
®
.
2. Click the
RED ROCKET
icon.
The Rocket Setup window opens. If the window does not open, then the RED ROCKET-X
®
, firmware, and/
or driver are not installed.
3. Select the check boxes that apply to how you want to use the RED ROCKET-X:
‒
Use for decoding
‒
Use for video out
NOTE:
The RED ROCKET icon is orange when either of the check boxes above are selected.
‒
Show Rocket Error dialog on startup
: Select this to display an error in the Status panel when the
RED ROCKET-X is installed in a lane slower than a x16 slot. For example, if your RED ROCKET-X is
installed in a Thunderbolt expansion chassis, you see this error because the majority of Thunderbolt
expansion chassis do not have x16 slots.
Click the RED ROCKET Icon
Select Check Boxes
07
SET UP RED ROCKET-X
IN REDCINE-X PRO