C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
9 5 5 - 0 0 1 2 , R EV - N
|
2 7
DSMC FAN 2.0 UPGRADE INSTRUCTIONS
CHAPTER 4:
CONFIGURE FIRMWARE
RED
®
recommends that you upgrade your camera firmware to the latest firmware version in order to have full control
over both the top and bottom fans. Camera firmware v4.0.12 and later offers full hardware support for both fans, and
provides more robust and precise fan settings, so that you have full control over the speed and noise level of the fans.
Earlier versions of firmware do not fully support DSMC
®
2.0 fans.
UPGRADE FIRMWARE
1. Download the latest firmware file for your camera from
2. Perform the firmware upgrade on your camera.
NOTE:
For more information on upgrading firmware, see the camera
, available at
.
PERFORM HARDWARE REDISCOVER
If you upgraded your firmware before installing the new fans, or if you are not upgrading your firmware, perform a
manual hardware rediscover after you install new fans so that the camera firmware recognizes the new fans.
NOTE:
The screenshots below are from firmware v6.0.
1. Turn on the camera.
2. Go to
Menu
>
Settings
>
Maintenance
.
3. Select
Rediscover
.
4. Select
Yes
to perform the hardware rediscover.
Wait for the camera to turn off.
Figure: Hardware Rediscover
5. Turn on the camera.
The camera firmware rediscovers all hardware and caches the data for future boot cycles.
