MODIFY A LENS PROFILE
The W.M.D. allows you to modify the encoder position related to a specific data point to fine-tune the active lens
profile.
1. Select
Profiles
in the W.M.D. main menu.
2. Select
Modify
.
NOTE:
The 60-second auto-lock feature is disabled while the Modify menu is open.
3. Select one of the following lens functions.
Focus
Iris
Zoom
4. Perform fine-tuning adjustments to calibrate the selected lens.
A. Adjust the gear so that the physical marking on the lens matches the
Mrk
value on the W.M.D. screen.
B. Press
Select
to update. The updated encoder position
At
value matches the
Mrk
value.
C. Repeat for each focal position on the lens as needed.
5. Press one of the following:
A.
Down
: Saves the lens profile and exits to the Profiles menu
B.
Back
: Does not save the lens profile and exits to the Profiles menu
C.
A
: Does not save the lens profile, exits to the home screen, and locks the W.M.D.
SAVE A LENS PROFILE
If save a lens profile, follow the instructions below:
1. Select
Profiles
in the W.M.D. main menu.
2. Select
Save
.
VIEW LENS METADATA
Metadata format is dependent on your lens profile setting:
Lens profile is selected (Select > Profiles)
: Focus, Iris, and Zoom data extrapolated from the motor encoder
positions displays for each lens function (Focus, Iris, Zoom).
Lens profile is not selected
: Hexadecimal motor position data displays for each lens function (Focus, Iris, Zoom).
Once you select a lens profile, you can view lens metadata on the W.M.D. screen.
NOTE:
If a lens does not support a particular lens function or a motor is not connected, the resulting value is
displayed as a hexadecimal value.
C O PYR I G HT © 2 0 1 7 R ED.C O M , LLC
9 5 5 - 0 0 4 4 , R EV - H
|
3 3
RED 3-AXIS SYSTEM OPERATION GUIDE
