MONITOR CONFIG (MONITOR CONFIGURATION)
Use the Monitor Config menu to apply looks and curves to the monitor output.
1. Select the monitor to configure from the drop-down menu at the top of the menu.
2. Select a look from the
Look
drop-down menu. Looks are set up in the Look Config menu. For more information,
go to
"Look Config (Look Configuration)" on the previous page
3. Select a curve from the
Curve
drop-down menu:
Neutral
: The camera does not apply a graded gamma space to the monitor output.
Graded
: The camera applies a graded gamma space to the monitor output.
The Video Path displays the video source and graded gamma space applied to the monitor.
NOTE:
The Curve drop-down menu is available if the Video Source is set to RLF or ACES. For more information,
go to
Figure: Monitor Config
C O PYR I G HT © 2 0 1 7 R ED.C O M , I NC
9 5 5 - 0 1 2 7 _V 6 .3 , R EV - M
|
8 7
RED RAVEN OPERATION GUIDE
