TIMECODE
The DSMC2 REDVOLT Expander features a Timecode (TC) connector.
The LEMO EAG.0B.305.CLN connector supports SMPTE timecode input and output. Pins 2 and 3 can be used
together to receive a balance SMPTE 12M serial timecode input. Pin 2 can be used by itself (leave pin 3 open) to
receive a single-ended SMPTE 12M serial timecode input. Pin 5 is a timecode output.
Figure: Front Face of Timecode (LEMO EAG.0B.305.CLN) Connector (Looking at the Camera)
LEMO EAG.0B.305.CLN CONNECTOR
PIN
SIGNAL
DESCRIPTION
DIRECTION
1
GROUND
Camera Ground
N/A
2
TIMECODE IN(S)
Timecode input - SMPTE single ended
In
3
N/A
No connection (NC)
N/A
4
+5 V OUT
+5 V out, 200 mA max
Out
5
TIMECODE OUT
SMPTE 12 M Timecode output
Out
NOTE:
Mating connector is FHG.0B.305.CLAD.
COMPATIBLE CABLE
790-0212
: Pro I/O Time Code Cable 3'
C O PYR I G HT © 2 0 1 7 R ED.C O M , I NC
9 5 5 - 0 1 2 7 _V 6 .3 , R EV - M
|
2 0 9
RED RAVEN OPERATION GUIDE
