CAMERA AND LENS STATUS
To set up what camera and lens info displays as part of the overlay, go to
Menu
>
Overlays
>
Status
.
CAMERA STATUS OVERLAYS
EXPOSURE
Shutter Speed
: Displays the exposure time in seconds (1/xx sec). When you change the frame rate in this mode,
the shutter speed stays the same, but the shutter angle changes.
Shutter Angle
: Displays the exposure as an angle (1° to 360°). When you change the frame rate in this mode, the
shutter angle stays the same, but the shutter speed changes. (Default)
POWER
Current Batt %
: Displays the remaining percentage of active battery. (Default)
Total Time
: Displays the total run-time left of battery power, taking into account all available batteries.
Voltage
: Displays the voltage.
VU METER
Input
: Displays levels of audio inputs (pre-mixer). (Default)
Output
: Displays levels of audio outputs (post-mixer).
HISTOGRAM
RGB
: Displays red, green, and blue channels on histogram. (Default)
Luma
: Displays luma channel on histogram.
MEDIA
Percentage
: Displays media space remaining as a percentage.
Time Remaining
: Displays media space remaining as time in hours and minutes (HHH:MM). (Default)
LENS STATUS OVERLAYS
APERTURE INCREMENTS
1/4 Stop
: Aperture increments in 1/4 stops.
1/3 Stop
: Aperture increments in 1/3 stops. (Default)
FOCUS DISTANCE
Metric
: Displays lens focus distances in meters.
Imperial
: Displays lens focus distances in feet and inches. (Default)
GUIDES
Use the Guides menu to configure the Frame Guide, Action Guide, and Title Guide.
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
9 5 5 - 0 1 8 4 _V 7 .2 , R EV - D
|
8 0
RED RANGER OPERATION GUIDE
