OUTPUT SUMMARY
The Output Summary menu is an information-only menu that displays what image information is applied to the R3D
files and proxy files. To view the output summary, go to
Menu
>
Image
>
Image Pipeline
>
Output Summary
.
Figure: Image Menu
R3D FILE METADATA
N/A
: Displays if the camera is not set to record R3D files. To enable/disable recording to R3D, go to
Record File Format" on page 114
.
3D LUT
: The name of the 3D LUT applied to the file. If no LUT is applied, the screen displays [NONE].
Output Color Space
: Applicable to IPP2 mode only. The name of the output color space selected on the Options
tab.
INTERMEDIATE / PROXY FILE
N/A
: Displays if the camera is not set to record Apple
®
ProRes files or Avid DNxHD/HR files. To enable/disable
recording to these files, go to
"Select Record File Format" on page 114
.
Color Space / Gamma Curve
: Applicable to Legacy mode only. The color space and gamma curve applied to the
file.
Baked-in Settings
: Applicable to IPP2 mode only. The image settings that are irreversibly encoded (baked) into
the recorded file. To select these settings, go to
"Select Record File Format" on page 114
.
Codec
: The selected codec. To select a codec, go to
"Select Record File Format" on page 114
WHITE BALANCE
Select a color temperature. The range is 1700 to 10,000 KELVIN, and the default is 5600 KELVIN.
TINT
Color temperature calculations assume a pure light source that may not be true in the specific scene the camera is
imaging. To compensate for any residual colorcast, the Tint parameter adjusts the RGB color balance with a
compensating magenta-green color component. Tint range is –100 to 100, with a default of 0.000.
The Tint value displays as a rounded number in the Upper Status Row.
NOTE:
Selecting Auto White Balance calculates a new Tint value. The value does not change if you adjust the color
temperature manually. Selecting a preset resets the Tint to 0.000.
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
9 5 5 - 0 1 8 4 _V 7 .2 , R EV - D
|
6 5
RED RANGER OPERATION GUIDE
