AUDIO PORTS
AUDIO
The 5-pin XLR connector provides input for two (2) audio channels. Use the adjacent Audio switch to set the audio
channels to line in (Line), Microphone level in (Mic), or microphone level in with 48 V 10mA phantom power (+48V). The
switch controls both channels together; the channels cannot be controlled independently.
Figure: Front Face of Audio Input (5-Pin XLR) Connector (Looking at the Camera)
5-PIN XLR CONNECTOR
PIN
SIGNAL
DESCRIPTION
DIRECTION
1
GROUND
Camera ground
N/A
2
CH1_P
Channel 1 (left), positive voltage
In
3
CH1_N
Channel 1 (left), negative voltage
In
4
CH2_P
Channel 2 (right), positive voltage
In
5
CH2_N
Channel 2 (right), negative voltage
In
HEADPHONE
The 3.5mm stereo jack provides two (2) channels of audio for monitoring. For maximum quality, use high impedance
headphones.
HEADPHONE JACK
PIN
SIGNAL
DESCRIPTION
DIRECTION
TIP
LEFT
Left channel audio
Out
RING
RIGHT
Right channel audio
Out
SLEEVE
GND
Camera ground
N/A
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
9 5 5 - 0 1 8 4 _V 7 .2 , R EV - D
|
2 0 1
RED RANGER OPERATION GUIDE
