11
ON Switch
The
ON footswitch engages or bypasses the effect. A short press will switch between on and bypass
(latching). When the pedal is in bypass, pressing and holding the
ON switch will momentarily engage the
effect, returning to bypass when the switch is released.
The latching on/off state is remembered when power is off.
AUX Switch
The
AUX footswitch can be assigned to different functions using our web editor or MIDI system exclusive
messages.
Tap (default)
Pressing the
AUX switch sets the tap tempo. Tap in quarter notes to set the tempo. The LFO note divi-
sion can be set using our web editor or MIDI. It is saved in presets and remembered when power is off.
Adjust the
RATE knob or hold the AUX switch for 2 seconds to disable tap tempo.
Preset
Pressing the
AUX switch cycles between front-panel presets and the manual knob and switch settings.
Preset Shift
Holding the
AUX switch momentarily jumps to the next preset. Releasing the switch goes back to the
previous preset or manual settings. It can be used to add emphasis. Works with these settings:
Manual --> Preset 1
Preset 1 --> Preset 2
Preset 2 --> Preset 3
Preset 3 --> Preset 4
Modulation On/Off
Pressing the
AUX switch alternates between turning the modulation on and off. The left LED blinks
green when modulation is switched on and red when it is switched off. This affect the LFO and wavesh-
aping, so it can be used to add modulation or more extreme digital distortion.
LFO Hold
Holding the
AUX momentarily freezes the LFO at its current value. Releasing the switch will cause the
LFO to run again. The left LED is red while the LFO is held.
LFO Hold On/Off
Pressing the
AUX switch alternates between LFO hold (left LED red) and running (left LED off).
