red lion 7018FX-HV Hardware Manual Download

Page: 55 / 160

N-Tron

Series 700/7000 Managed Industrial Ethernet Switch Hardware Manual - Volume I

2-41

Hardware Installation

Revised 2019-08-22

Mounting the Unit

Drawing No. LP0988

708M12

and

716M12

Dimensions

and

Drill

Hole

Locations

2.3.5

Horizontal

DIN

‐

Rail

Mounting

708M12

and

716M12

Install the switch to standard 35mm DIN-Rail.

Attach the optional M12DRC or M12DRC-ISO DIN-Rail kit to the back of the switch.

Place the bottom edge of the bracket on the back of the unit against the DIN-Rail bottom edge at a downward
angle.

Then, gently rotate the front of the switch upward, towards the DIN-Rail.

Push the top of the switch towards the DIN-Rail until it locks into place.

Apply downward force to verify the switch is securely installed.

Connect any communications cables to the switch.

Install the power connector and ground wires.

Apply power to the power supply.

708M12

716M12

Summary of Contents for 7018FX-HV

































































































































































Search results

Summary of Contents for 7018FX-HV

Reviews:

Related manuals for 7018FX-HV

Brands by name

Popular brands

red lion 7018FX-HV, Hardware Manual

Search results

Summary of Contents for 7018FX-HV

Reviews:

Related manuals for 7018FX-HV

Brands by name

Popular brands