background image

1

!

RATE INDICATION

!

6-DIGIT, 0.56" (14.2 mm) HIGH LED DISPLAYS

!

INPUT RATES UP TO 25 KHZ

!

ACCEPTS A WIDE VARIETY OF SENSORS

!

PROGRAMMABLE SCALING

!

PROGRAMMABLE UPDATE TIME

!

PROGRAMMABLE DECIMAL POINTS

!

NEMA 4X/IP65 SEALED FRONT BEZEL

GENERAL DESCRIPTION

The PAX

®

Lite Rate Meter, Model PAXLR, provides the versatility and

flexibility needed to accommodate virtually any rate measuring application. The
meter has the ability to scale for direct readout in terms of the units being
measured. Whether a machine produces bottles, cloth, wire, or beverage mix,
operation is enhanced when the rate readout is expressed directly in bottles/min.,
feet/min., gallons/min., or whatever units are needed in plant applications.

The PAXLR can accommodate magnetic pickups, logic sensors, and NPN

open collector sensors. The pulses are received and scaled, so the desired
display can be achieved. The meter is programmed through both the front panel
buttons and DIP switches. Once the programming is complete, the front panel
buttons can be disabled by a DIP switch setting.

The meter has been specifically designed for harsh industrial environments.

With NEMA 4X/IP65 sealed bezel and extensive testing to meet CE
requirements, the meter provides a tough, yet reliable application solution.

SAFETY SUMMARY

All safety related regulations, local codes and instructions that appear in the

literature or on equipment must be observed to ensure personal safety and to
prevent damage to either the instrument or equipment connected to it. If
equipment is used in a manner not specified by the manufacturer, the protection
provided by the equipment may be impaired.

MODEL PAXLR - PAX

®

LITE RATE METER

Bulletin No.  PAXLR-C
Drawing No.  LP0564
Released  8/08

Tel +1 (717) 767-6511
Fax +1 (717) 764-0839
www.redlion.net

CAUTION: Risk of Danger.

Read complete instructions prior to

installation and operation of the unit.

CAUTION: 

Risk of electric shock.

DIMENSIONS  In inches (mm)

Note: Recommended minimum clearance (behind the panel) for mounting clip installation is 

2.1" (53.4) H x 5" (127) W.

C

US LISTED

US LISTED

UL

R

IND. CONT. EQ.

51EB

Summary of Contents for PAXLR000









Reviews: