Red Hat NETWORK 4.0 - Reference Manual Download Page 74

Page: 74 / 290

Chapter 5. Red Hat Network Registration Client

Figure 5-8. System Profile - Hardware

5.4.2. Software System Profile

The software System Profile consists of a list of RPM packages for which you wish to

receive notifications. The

Red Hat Network Registration Client

displays a list of all RPM

packages listed in the RPM database on your system and then allows you to customize the

list by deselecting packages.

5.4.2.1. Gathering RPM Database Information

Only those packages you choose during this part of the registration are included in your

System Profile, and you will only receive notifications about the packages in your System

Profile. Thus, if you use an older version of a package and deselect it from the list, it will

not be replaced with a newer version. This RPM list can be modified through the Red Hat

Network website or by using the

Red Hat Update Agent

. Figure 5-9 shows the progress

bar displayed while the

Red Hat Network Registration Client

gathers a list of the RPM

packages installed on your system. This operation may take some time depending on your

system.

Summary of Contents for NETWORK 4.0 -



































































































































































































































































































Search results

Summary of Contents for NETWORK 4.0 -

Reviews:

Related manuals for NETWORK 4.0 -

Brands by name

Popular brands

Red Hat NETWORK 4.0 -, Reference Manual

Search results

Summary of Contents for NETWORK 4.0 -

Reviews:

Related manuals for NETWORK 4.0 -

Brands by name

Popular brands