Red Hat NETWORK 4.0 -, Reference Manual

Page: 269 / 290

Appendix C. Probes 253
Field Value
Critical Maximum Output Rate
Table C-65. RHN Satellite Server::Interface Traffic settings
C.10.4. RHN Satellite Server::Latency
The RHN Satellite Server::Latency probe monitors the latency of probes on a Satellite and
collects the following metric:
•
Probe Latency Average — The lag in seconds between the time a probe becomes ready
to run and the time it is actually run. Under normal conditions, this is generally less than
a second. When a Satellite is overloaded (because it has too many probes with respect
to their average execution time), the number goes up.
Field Value
Critical Maximum Probe Latency Average
Warning Maximum Probe Latency Average
Table C-66. RHN Satellite Server::Latency settings
C.10.5. RHN Satellite Server::Load
The RHN Satellite Server::Load probe monitors the CPU load on a Satellite and collects
the following metric:
•
Load — The load average on the CPU for a 1-, 5-, and 15-minute period.
Field Value
Critical Maximum 1-minute Average
Warning Maximum 1-minute Average
Critical Maximum 5-minute Average
Warning Maximum 5-minute Average
Critical Maximum 15-minute Average
Warning Maximum 15-minute Average