Red Hat GFS 5.2.1 - Administrator'S Manual Download Page 48

Page: 48 / 192

Chapter 5. Using the Pool Volume Manager

5.10. Renaming a Pool Volume

The

pool_tool

command can be used to change the name of a pool.

5.10.1. Usage

pool_tool -r

NewPoolName CurrentPoolName

NewPoolName

Specifies the new name of the pool.

CurrentPoolName

Specifies the pool name to be changed.

Note

In releases before GFS 5.2, the

-r

flag had a different usage.

Note

You must deactivate a pool before renaming it. You can deactivate a pool with the

pool_assemble

-r

PoolName

command.

5.10.2. Example

This example changes the name for pool

mypool

pool0

pool_tool -r pool0 mypool

5.11. Changing a Pool Volume Minor Number

The

pool_tool

command can be used to change the minor number of a pool.

5.11.1. Usage

pool_tool -m

Number PoolName

Number

Specifies the new minor number to be used.

Summary of Contents for GFS 5.2.1 -

































































































































































































Search results

Summary of Contents for GFS 5.2.1 -

Reviews:

Related manuals for GFS 5.2.1 -

Brands by name

Popular brands

Red Hat GFS 5.2.1 -, Administrator'S Manual

Search results

Summary of Contents for GFS 5.2.1 -

Reviews:

Related manuals for GFS 5.2.1 -

Brands by name

Popular brands