Chapter 1. Package Updates
72
This update improves this behavior with a symbolic link check so that Evince is now able to
successfully open a link to a supported document type when both the link and actual file are located
on an NFS share. (
BZ#481593
463
)
* the gnome-vfs-daemon service reads the list of mounted devices at /proc/mounts upon startup. If
one of the device paths was not valid UTF-8, gnome-vfs-daemon was disconnected by D-Bus when it
attempted to communicate the path over the system message bus, at which time it exited. However,
other GNOME applications would then attempt to restart gnome-vfs-daemon, at which time the same
sequence of events reoccurred, leading to a potentially infinite loop and much extraneous CPU usage.
With this update, gnome-vfs-daemon correctly converts the information provided by /proc/mounts into
valid UTF-8 before communicating it via D-Bus, which prevents the possibility of gnome-vfs-daemon
being disconnected, exiting, and being restarted in a continuous fashion. (
BZ#486286
464
)
* accessing a WebDAV share which contained a comma in its path name with the Nautilus file
manager resulted in a "File not found" error. This update ensures that reserved characters in
path names are properly escaped, and thus Nautilus is able to access such paths as expected.
(
BZ#503112
465
)
All GNOME users are advised to upgrade to these updated packages, which resolve these issues.
Running GNOME sessions must be restarted for the update to take effect.
1.66. gpart
1.66.1. RHBA-2009:1606: bug fix update
Note
This update has already been released (prior to the GA of this release) as FASTRACK
errata
RHBA-2009:1606
466
A gpart update that fixes a bug in the -debuginfo package is now available.
Gpart is a small tool which tries to guess what partitions are on a PC type harddisk in case the primary
partition table was damaged.
This update addresses the following issue:
* although gpart contains ELF objects, the gpart-debuginfo package was empty. With this update the -
debuginfo package contains valid debugging information as expected. (
BZ#500598
467
)
gpart users needing the gpart debuginfo package should install this upgraded package which fixes this
problem.
463
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=481593
464
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=486286
465
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=503112
467
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=500598
Summary of Contents for ENTERPRISE LINUX 5.5 - S 2010
