JUNE 7, 2011
© 2011 RED.COM INC.
9
OPERATION
This section describes powering up/down and basic controls of RED Focus and how to initiate a project.
POWER UP / DOWN
POWER UP
To power up RED Focus, press the Power button located at the front.
•
The Power LED will illuminate Green indicating RED Focus is on and ready.
•
The image displayed by RED Focus will be visible when installed on a cameras PL mount with the
camera powered up.
POWER DOWN
After 3 minutes, RED Focus will automatically power down.
RED Focus cannot be powered down by
pressing or holding down the Red button.
NOTE: To manually power down RED Focus off, the batteries must be removed. Refer to GETTING
STARTED > BATTERY INSTALLATION / REPLACEMENT.
CAMERA BACKFOCUS ADJUSTMENT
RED ONE
1.
Place the camera on a level, stable surface or mount the camera on a tripod.
2.
Using a 5/32” Allen wrench, loosen the two (2) focus ring bolts.
Loosening RED ONE Focus Ring Bolts
