Red Epic Dragon, Operation Manual

Page: 109 / 167

RED DSMC OPERATION GUIDE
COPYRIGHT © 2013 RED.COM, INC
955-0020_V5.1, REV-D | 109
opposed to when no media is inserted, the GUI displays NONE with three dashes below “---“).
‒ On REDMOTE, NONE will be displayed twice (as opposed to when no media is inserted, the GUI dis-
plays NONE with three dashes below “---“).
‒ On the DSMC SIDE HANDLE, NA will be displayed (same as if no media is present).
3. To format the media, go to Menu > Media .
4. Select Format Media .
5. Select an option from the Select Media drop-down menu.
6. Select Format Media... .
A dialog box appear allowing you to add Camera Identity and 3D Position properties when formatting.
7. Select your formatting options and select Format .
NOTE: If any clips will be erased on the attached media, you will be informed of the number.
8. Once formatting is completed, the Viewfinder output(s) will display “THE MAGAZINE WAS SUCCESSFULLY
FORMATTED THE DIGTAL MAGAZINE IS READY FOR IMMEDIATE USE”.
METADATA
RED’s family of DSMC cameras record the Metadata, which is data for each frame of the recording:
Clip Name
Time Code
Date and GMT
Lens and shutter speed/angle parameters
Audio configuration
Firmware version #
media serial #
LTC user bits (3 32-bit word reg-dump from ISP)
s4i static data
s4i dynamic data
GMT time/data
RGB curves
shadow control
Luma curve
Lens name, brand, ID, near focus, far focus
Camera Network Name
Production Name
Director Name
DP Name
Copyright
Unit
Camera Name
Location
Scene
Take
Accelerometer Data
Gyro Data