Malfunctions
7
BAL_PROTECT_RC2_RC3_EN_1V0_BLA_121-006454704
27 / 30
7.1.7
Manual closing - step 1
Key
Function
Display
Description BDE-D
Manual mode
– Press key 2 x in succession
– The door can be closed or opened manually
Makeshift door operation
(e.g. at low outside temperature)
Locked
–
Night locking
– Press
additionally
the Locked key
– Push the door manually to the closed position
– Door is closed and locked (if locking device is present)
Notify service center
(Phone number is shown on the display)
NOTICE
If the door still cannot be operated and locked manually, perform the steps described below.
7.1.8
Manual closing - step 2
If the attempts to close and lock the door described under "step 1" have remained unsuccessful, it in-
dicates a severe failure. Please proceed as follows:
Example: Sequence of manual closing
– Set the door in manual mode with the control unit (see chapter
"Manual closing - step 1").
– Open the drive casing (swing open).
Note:
If you pull near the hinges, it helps open the casing.
– Fold out the red support to fix the drive cover in the open position.
– Disconnect the equipment from the power supply.
– The socket is located under the drive casing.
For systems with integrated emergency battery:
– In addition, unscrew the battery fuses.
– The battery is located under the drive casing.
