Options
4
BAL_K32_K42_ST_EN_1V2_REC_121-006454613
27 / 48
4.11.3
Fully automatic night shield
It is operated with a door open button, or a turn key switch, or an on-site code card reader.
CAUTION
Night shield crushing danger
a) Fingers or hands getting crushed, sheared or pulled in
ð
To avoid crushing, the operator must have a clear view of the night shield during the OPENING
and CLOSING process.
Fully automatic night shield drive with electric lock:
Place the door in the LOCKED operating mode.
The night shield is closed and electrically locked.
By pressing the door open button, or using the turn key switch or on-site code card reader, the night
shield will unlock and open up completely.
Once the night shield is completely opened, the turnstile will start, turn one complete rotation at slow
speed and come to a standstill in the home position.
Then the night shield closes again automatically and locks.
In the operating modes AUTOMATIC, CONTINUOUS and MANUAL, the night shield unlocks itself,
opens automatically and remains open. If switched to the LOCKED operating mode, the night shield
closes again automatically.
Security sensors:
if the detection area of the security sensors is entered during the closing process,
the night shield will open (reverse) immediately. If no security sensors are activated the night shield
will close and lock automatically.
Collision detection:
if the night shield wing strikes an obstacle during the closing process, the night
shield will stop and open again. The next attempt to close will start from the obstruction area at slow
speed.
The night shield will also stop, if its wing strikes and obstacle during the opening process. The next at-
tempt to open will start at slow speed.
