8
Malfunctions
44 / 48
BAL_K32_K42_ST_EN_1V2_REC_121-006454613
161
Vertical sensor STOP
rotor blade 4 (OP-
VSR42)
– OptoStop, Immediate stop of
the rotation
– Remove object from the detection range
of the sensor
– Check sensor for contamination, clean if
possible
– Perform reset
– If not successful, contact service
VSR4_STOP active
162
Test error vertical
sensor STOP rotor
blade 1 (OP-VSR12)
– ErrorStop, Immediate stop of
the rotation
– Perform reset
– If not successful, contact service
OP-VSR1_STOP test
error
163
Test error vertical
sensor STOP rotor
blade 2 (OP-VSR22)
– ErrorStop, Immediate stop of
the rotation
– Perform reset
– If not successful, contact service
OP-VSR2_STOP test
error
164
Test error vertical
sensor STOP rotor
blade 3 (OP-VSR32)
– ErrorStop, Immediate stop of
the rotation
– Perform reset
– If not successful, contact service
OP-VSR3_STOP test
error
165
Test error vertical
sensor STOP rotor
blade 4 (OP-VSR42)
– ErrorStop, Immediate stop of
the rotation
– Perform reset
– If not successful, contact service
OP-VSR4_STOP test
error
166
Horizontal safety bar ro-
tor blade backwards 1
(SL-FES1.2)
– SafetyStop, Immediate stop
of the rotation
– Remove object from safety edge, possibly
dirt on the floor, under a heel guard
– Perform reset
– If not successful, contact service
SL-FES12 active
167
Vertical safety bar rotor
blade backwards 1 (SL-
VSR1.2)
– SafetyStop, Immediate stop
of the rotation
– Remove object from safety edge, possibly
dirt on the floor, under a heel guard
– Perform reset
– If not successful, contact service
SL-VSR12 active
168
Horizontal safety bar ro-
tor blade backwards 2
(SL-FES2.2)
– SafetyStop, Immediate stop
of the rotation
– Remove object from safety edge, possibly
dirt on the floor, under a heel guard
– Perform reset
– If not successful, contact service
SL-FES22 active
169
Vertical safety bar rotor
blade backwards 2 (SL-
VSR2.2)
– SafetyStop, Immediate stop
of the rotation
– Remove object from safety edge, possibly
dirt on the floor, under a heel guard
– Perform reset
– If not successful, contact service
SL-VSR22 active
170
Horizontal safety bar ro-
tor blade backwards 3
(SL-FES3.2)
– SafetyStop, Immediate stop
of the rotation
– Remove object from safety edge, possibly
dirt on the floor, under a heel guard
– Perform reset
– If not successful, contact service
SL-FES32 active
