Record C 127 SU S, User Manual

Page: 24 / 34

D M
└► M
Basis
Interlock I/O-Set 1
└► D M Disabled S_AUS
└► D M Disabled SEA
└► D M Disabled SFS_IN
└► D M Disabled
└► D M Disabled Alarm output Locked Closed Open SAMP
SAA SFS_OUT OM Automatic OM One-way OM Locked OM Cont. open
OM Manual OM OFF Locking error
Emerg. stop or
open
Maintenance is
due
Maint. time
exceeded
└► D M Disabled
└► D M Disabled
└► D M Disabled
└► D M Disabled
└► D M Disabled
└► D M Disabled
└► D M Disabled
└► D M Disabled
└► D M Disabled
└► D M Disabled
└► D M
Disabled
└► D M Disabled
└► D M
Disabled
└► D M Disabled
System DFA 127 parameter overview
≥ V1.10
≥ V2.40
FEM 1
STG 127
AUX16_OUT [92/93]
AUX15_OUT [90/91]
AUX19_OUT [98/99]
AUX1A_OUT [100/101]
D = Value will not be reset after loading default parameter
M = Parameter modification via MFT (key) on STG (technical level)
PARAMETER FEM 1
Description 6
Parameter value ( factory settings printed bold)
1 2 3 5
AUX14_OUT [88/89]
AUX12_IN [68/69]
OUTPUT FEM 1
AUX10_OUT [73/74]
AUX12_OUT [79/80]
AUX1x_OUT
AUX13_IN [70/71]
AUX11_OUT [76/77]
FEM 1
4
AUX13_OUT [82/83]
AUX10_IN [64/65]
FEM type
AUX11_IN [66/67]
INPUT FEM 1
All outputs can be configured according to AUX1x_OUT
FEM 1 in use with STG 127
Instruction software: The possibilities of FEM 1 depend chiefly on the software version of the control.
Instruction FEM 1: Not configurable functions in use with STG 127 are marked with an (*).
AUX17_OUT [94/95]
AUX18_OUT [96/97]
AUX1D_OUT [106/107]
AUX1B_OUT [102/103]
AUX1C_OUT [104/105]