RECO RM-310 C, Operating And Installation Instructions

Page: 16 / 41

Documentation RM-310 C / RM-310 CT / RM-310 C Plug and Play / RM-310 CT Plug and Play
RDN 10001104
16
14.07.2020
Parameter block C0, activated
Display Meaning
Parameter block C0 "Service operating hours"
The group is active (activated without message)
The block is protected by Code 5
C0 Ser.ope.hours
1 act.w/o mess.
Parameter code 5
Parameter C1 of parameter block C0
Parameter block C0 "Service operating hours"
Parameter C1 “Counter mode”
Set value of the parameter C1
C0 Ser.ope.hours
C1 Counter mode
3 DP / Clean on
Parameter block D0, faded out
Parameter group D0 " Δ p -control"
The block is faded out (parameter not visible)
The block is protected by Code 3
D0 DP-controls
0 faded out
Parameter code 3
Parameter block D0, faded in
Parameter group D0 " Δ p -control"
The block is faded in (parameters are visible)
The block is protected by Code 3
D0 DP-control
1 faded in
Parameter code 3
Parameter D1 of parameter block D0
Parameter block D0 “ Δ
p
-controls“
Parameter D1 “ Δ
p
Cleaning mode“
Set value of the parameter D1
Parameter D1 is protected by Code 3
D0 DP-controls
D1 Cleaning mode
1 DP cont.clean.
Parameter code 3
Parameter block B0
Parameter block B0 “Display language”
The block consists only of parameter B0
Set value of the parameter B0
The block is not protected by a code
B0 Disp.language
0 D - Deutsch