manualshive.com logo in svg

recke TVD32A1000T2, User Manual, Page: 20 / 50

Share
Download
recke TVD32A1000T2 User Manual Download Page 20

External Connection

Connecting

 a 

Camcorder

The rear panel jacks on your TV make it easy to connect a camcorder to your TV. They 

allow you to view the camcorder tapes without using a VCR.

18

Each Camcorder has a different back panel configuration. 
When connecting a Camcorder or DVD, match the color of the connection terminal to
the cable.

1. Connect a Video Cable between the AV VIDEO jacks on the TV and the VIDEO OUT 
    jack on the camcorder.
2. Connect Audio Cables between the AUDIO L and AUDIO R jacks on the TV and the 
    AUDIO OUT jacks on the camcorder.
3. Connect a Video Cable between the component IN Y on the TV and the VIDEO OUT jack 
    on the DVD.
4. Connect Audio Cables between the component IN  AUDIO L and  R jacks on the TV and 
    the AUDIO OUT jack on the DVD.

 
Note:
 1. Whenever you connect an external device to your TV, make sure that power on the unit  
     is turned off. 
 2. When connecting an external device, match the color of the connection terminal to the 
     cable.

Video Cable (Not supplied)

1

Audio Cable (Not supplied)

2

Camcorder

White

Yellow

Red

Red

White

Yellow

Summary of Contents for TVD32A1000T2



















































Reviews:

No comments