Beijing Reci Laser Technology Co., Ltd
User Guide for FSC1000, FSC1500
33
NO
MODULE
DESCRIPTION
FUNCTION
Analog
Sampling value of power supply added to back-end
analog data line
5
Rear panel
As the figure 5.3
Green lamp on means the corresponding signal is valid
6
Fault
As the figure 5.3
Red lamp on means the corresponding fault is valid
7
System
information
Machine number
The number of the laser device
Hardware version Hardware version of the device
Firmware version Firmware version of the device
Running time
Display the device has been running
，
The unit is minutes
Remaining time
Display the remaining time of the device can be used
5.3
Setting Page
The Page is just as the figure 5.4. The function of the different button is as the
following table 5.2.
1
2
3
4
Figure 5.2 Setting Page
The function of the setting page is shown in the table below:
