Rebound Products Non-Fold, Setup

Page: 1 / 14

Non-­‐Fold Setup
You should have:
2 – End Bars 12 – corner springs
2 – Midsections 4 -­‐ Frame pad springs
4 – Chain Braces (Longest braces) 4 -­‐ webbing springs
4 – Inner leg braces (curved tabs) 1 -­‐ trampoline bed
4 – Outer leg braces (shortest braces) 1 -­‐ set of frame pads
2 – Legs 106 -­‐ H.P. springs
1 webbing rectangle 10 – pad lifters
For ease of set up have four people.
Add a little grease to the leg tops and insert into the midsections.
*You should try to start by having a level surface before assembly.*
When the legs are inserted to the midsection replace the screw and large washer.
Attach the Chain braces loosely to the midsections holes which are 15” from the
center.
Lift the ends of the midsections and bolt the chain brace to the tabs located on
the legs loosely.
Do the same with the other side. When complete the midsections should be free
standing.