Version Number: RBA1400-20210106A1
1
Operation Manual
Reboot RBA1400 is an intelligent and easy-to-operate welding machine with manual welding mode. It has the
characteristics of good welding performance, diversified usage scenarios, and outstanding welding effects. It is highly
praised by welding enthusiasts and is also very good for beginners in welding. Friendly and can get started quickly.
Part 1: Machine Introduction
1.
Current display meter
Only displays the preset current.
2.
Fault light
When the welding load is overloaded and the output current of the machine is too large, this light will be on. This situation is
normal and the machine can be restored; when there is damage inside the machine, this light will be on. In this case, the
machine is abnormal and requires maintenance.
3.
The adjustment knob
MMA: Adjusts the current, arc force and hot start; LIFT TIG: Adjusts the current.
4.
MMA and LIFT TIG selection
MMA VRD ON
: Turn on this knob, the output no-load voltage is below DC15V,Below the safe voltage, there is protection for
human safety, but arc starting will be a little more difficult.
MMA VRD OFF
: Turn on this knob, the output no-load voltage is DC 60V.
LIFT TIG
: Turn on this knob,Can be argon arc welding
5.
Function selection
Hot start:
For MMA mode, it is easier to start arcing when welding with low current, and it is not easy to start the arc during
welding.
ARC FORCE:
For MMA mode, it is easier to start arcing when welding with low current, and it is not easy to start the arc during
welding.
WELDING CURRENT:
MMA and LIFT TIG adjust current.
6.
Electrode diameter selection
Choose different welding wire diameters, corresponding to the corresponding current, no need to adjust the current again
