4. Controlling the Sequencer
MaschineR allows control of the Reason sequencer and transport. Some additional sequencer functions are accessed via key
commands and are described below.
A. Selecting a device and changing patches
Another way to select a device or change patches is to use the following shortcut:
Maschine
R
- Getting Started Guide
18
Prev
Track
Open the virtual display, then press the “
Swing”
button to open “Track Mode”. Make sure the “Track”
field is selected and active with the green highlight
rectangle around it.
Now you can turn the data wheel to move to the
desired device in the sequencer.
Similarly for the patch of the selected device
Next
Track
Prev
Patch
Next
Patch
Press the “
Variation
” button. The pads will change
color as shown on the side. Use pads
3
and
13
to
change track. By pressing pads
6
and
8
it is also
possible to change the patch for the selected track as
well.
