RealWear Navigator 500™ User Guide
Page 15 of 148
Version 1.1
1.2.1.4.2
Install the Camera
To install the camera, do the following:
1. Align the camera female connector with the device male connector.
2. Gently press the camera until the camera is flush with the device.
3. Press the camera tab down until it snaps securely into place.
1.2.1.5
Boom Arm
The Boom Arm allows the user to adjust the positioning of the Display Pod and allows for 6
degrees of freedom, which means it can be adjusted up and down, left and right, and forward
and back. It is comprised of a Shoulder, Elbow, and Wrist joint (imagine the human arm). Its
orientation can be inverted to allow use by left or right eye dominant users.
Boom Arm
