Customer Service: 1-800-654-1704 in USA
Real Flame®
7800 Northwestern Ave.
Racine, WI 53406
R0001-BK Rubber Hose Cover
Instruction Manual
1.) Remove hose cover from packaging and lay out on a flat surface.
2.) Spread open and bend back bottom of hose cover and insert LP or NG hose into the cover.
3.) Lay hose and hose cover down on a flat surface and follow directions included in your fire table owners
manual for directions on connecting the hose to your gas supply.
Parts
Assembly and Use
LP/ NG
Hose
R0001-BK
Hose end may vary
To Fire Table
!
WARNING
Disconnect your hose from the gas supply
before installing the hose cover.
The hose should not be disconnected from the
control valve on the fire table.
The hose and hose cover are a possible tripping
hazard. Make sure anyone in the area of the fire
table is aware of its placement.
