OAKMONT GLASS TOP COFFEE TABLE
ASSEMBLY INSTRUCTION
ITEM# GB19-528
SKU# 810419156
ASSEMBLY INSTRUCTION
DO NOT RETURN THIS PRODUCT TO THE STORE. FOR MISSING PARTS OR QUESTIONS TO THIS PRODUCT
PLEASE CALL US AT 1-888-733-8169 OR EMAIL US AT
[email protected] OR [email protected] OR [email protected]
IMPORTANT:
Please read all the instructions and warnings before assembling. In order to make the whole product adjust to the best,
please install all the screws on the product before fully tighten, and tighten all the screws after adjusting the product which
can stand on the floor even.
WARNING:
Use the correct screws as indicated. All screws should be hand tight untill the complete piece is
assembled ( This will make the assembly process much easier ). Once the piece is fully assembled, then
go back and tight all screws with provided tool.
Keep all children and pets away from assembly area. Children and pets should be supervised when they are in the area of the
product construction.
Keep assembly area at leat 6 feet from any obstruction such as a fence, garage, house, overhanging branches, laundry line or
electrical wires.
Some parts may contain sharp edges. When assembling and using this product, basic safety precautions should always be
followed to reduce the risk of personal injury and damage to the product. Please read all instructions before assembly and
use.
The table is not to be used for standing purposes and will not function as a stool or step-ladder. Use on even surfaces only.
CARE & MAINTENANCE
STAIN RESISTANT CUSHIONS CARE —— KEEP THE CUSHIONS IN STORAGE IN RAINING DAY.
SPILLS:
Immediately wipe up the spill using a white damp cloth. Repeat process if necessary until stain is gone. Allow
cushion to air dry.
FABRIC CARE:
Hand wash cold, non-chlorine bleach when needed, lay flat to dry. Cool iron if necessary. Do not dry
clean.
ALL WEAHTER WICKER PRODUCT CARE
Before using, clean the product completely with a soft dry towel. When not in use, wipe free of any dirt or loose objects,
wash with a mild solution of soap and water, rinse thoroughly and dry completely. Do not use strong detergent or abrasive
cleaners. Over time nuts and screws can loosen. Occasinally, check nuts and screws on the rocker, re-tighten if necessary.
